OpenNETCF Smart Device Framework 2.2
Specifies types of network interfaces.
Namespace:
OpenNETCF.Net.NetworkInformationAssembly: OpenNETCF.Net (in OpenNETCF.Net)
Version: 2.2.0.0
Syntax
| C# |
|---|
public enum NetworkInterfaceType |
| Visual Basic (Declaration) |
|---|
Public Enumeration NetworkInterfaceType |
| Visual Basic (Usage) |
|---|
Dim instance As NetworkInterfaceType |
| Visual C++ |
|---|
public enum class NetworkInterfaceType |
| J# |
|---|
public enum NetworkInterfaceType |
| JScript |
|---|
public enum NetworkInterfaceType |
Members
| Member name | Description | |
|---|---|---|
| AsymmetricDsl |
The network interface uses an Asymmetric Digital Subscriber Line (ADSL).
| |
| Atm |
The network interface uses asynchronous transfer mode (ATM) for data transmission
| |
| BasicIsdn |
The network interface uses a basic rate interface Integrated Services Digital Network (ISDN) connection. ISDN is a set of standards for data transmission over telephone lines
| |
| Ethernet |
The network interface uses an Ethernet connection. Ethernet is defined in IEEE standard 802.3
| |
| Ethernet3MegaBit |
#Mb Ethernet
| |
| FastEthernetFx |
The network interface uses a Fast Ethernet connection over optical fiber. This type of connection is also known as 100BaseFX
| |
| FastEthernetT |
The network interface uses a Fast Ethernet connection. Fast Ethernet provides a data rate of 100 megabits per second, known as 100BaseT
| |
| Fddi |
The network interface uses a Fiber Distributed Data Interface (FDDI) connection. FDDI is a set of standards for data transmission on fiber optic lines in a local area network
| |
| GenericModem |
The network interface uses a modem
| |
| GigaBitEthernet | ||
| HighPerformanceSerialBus |
The network interface uses a High Performance Serial Bus
| |
| IPOverAtm |
The network interface uses Internet Protocol (IP) in combination with asynchronous transfer mode (ATM) for data transmission
| |
| Isdn |
The network interface uses a connection configured for ISDN and the X.25 protocol. X.25 allows computers on public networks to communicate using an intermediary computer
| |
| Loopback |
The network interface is a loopback adapter. Such interfaces are used primarily for testing; no traffic is sent
| |
| MultiRateSymmetricDsl |
The network interface uses a Multirate Digital Subscriber Line
| |
| Ppp |
The network interface uses a Point-To-Point protocol (PPP) connection. PPP is a protocol for data transmission using a serial device
| |
| PrimaryIsdn |
The network interface uses a primary rate interface Integrated Services Digital Network (ISDN) connection. ISDN is a set of standards for data transmission over telephone lines
| |
| RateAdaptDsl |
The network interface uses a Rate Adaptive Digital Subscriber Line (ADSL).
| |
| Slip |
The network interface uses a Serial Line Internet Protocol (SLIP) connection. SLIP is defined in IETF RFC 1055
| |
| SymmetricDsl |
The network interface uses a Symmetric Digital Subscriber Line (SDSL).
| |
| TokenRing |
The network interface uses a Token-Ring connection. Token-Ring is defined in IEEE standard 802.5
| |
| Tunnel |
The network interface uses a tunnel connection
| |
| Unknown |
The interface type is not known
| |
| VeryHighSpeedDsl |
The network interface uses a Very High Data Rate Digital Subscriber Line (VDSL).
| |
| Wireless80211 |
The network interface uses a wireless LAN connection (IEEE 802.11 standard).
|
